- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Front
Bumper- Front
- Heavy Duty 3/16 Steel Construction Protects The Vehicles Vital Components And Add Strength
- Fully Compatible With OE Sensor Package Radius To Match OE Styling
- Winch Mount Compatible
- Light Mounts Included
- Provision For One 30 in. Light Bar-Single Or Double Row And Up To Four 2x2 Pod Lights
- D-Ring Mount Included
- Ultra Light Weight Hybrid Bumper w/Tube And Plate Steel
- Sleek Aerodynamic Design
- Provides Optimal Tire Clearance
- Retains Factory Skid Plate
- Retains Adaptive Cruise Control And Park Assist
- Center Cutout For Rigid Industries 20 in. LED Light Bar
- The Fit Of The Bumper Is High And Tight
- Perfectly Follows The Vehicles Body Lines
- Ambush Series Front Bumper
- Intercooler Shroud For Diesel Engines Only
- Easy Bolt On Installation
- Protects From Debris
- Two-Stage Light Texture Finished In Black
- Smitty Bilt Apollo JL/JT Front Bumper
- Bold Stubby Bumper Profile Perfect For Off-Road
- Patented-Design Made From Stamped 11-Gauge Steel
- Bold Stubby Bumper Profile Perfect For Off-Road
- Patented-Design Made From Stamped 11-Gauge Steel
- Massive 1 In. Thick Recovery Hooks w/Dual-Drilled Shackle Mounts
- Built-In Off-Road Jack Lifting Points
- Simple Bolt-On Installation
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- MADE IN THE USA
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- MADE IN THE USA
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- MADE IN THE USA
- Full Replacement Bumper With Full Grill Guard
- Gloss Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- Optional Bolt-on 2in. Receiver
- MADE IN THE USA
- OE Style
- Direct Fit
- Limited 5 Year Warranty
- Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
- OE Style
- Direct Fit
- Limited 5 Year Warranty
- Specific Design To Complement Vehicle
- Durable Steel Construction For Maximum Protection
- Superbly Engineered/Airbag Compatible Mounting System
- Equally Suited For Winch And Non Winch Applications
- Separate Winch Cover Panel Available
- Provision To Accommodate A Range Of IPF And ARB Driving Lights
- Retains OE Fog Lights
- Tow Points Allow For Excellent Approach Angle
- Wing Design Allows For A 37 In. Tire To Be Fitted
- Wings Designed To Suit OE Flares Of Models
- Durable Urethane Buffers
- Classic Rock Crawling Front Bumper
- Double Steel Construction For Maximum Protection
- Optimum Strength And Approach Angle
- Cover Straps Attached To The Uprights
- No Exposed Edges
- Accommodates A Range Of IPF/ARB Driving Lights
- Hard Wearing Satin Black Powder Coat
- Two Piece Construction
- Tubular w/Sheet Metal Design
- Step Corners For Easy Bed Access
- Tail Corners Keep OE Vehicle Lines
- 1/8 in. Thick Steel Plate
- ADD Aggressive Style w/o Weighing Down The Vehicle
- Bolt On Installation
- Non-Winch Capable
- OE Sensor Compatible
- Includes License Plate Bracket
- Light Fitment 20 in. Dual Row LED Middle/4 Cube LEDs
- 1/8 in. Steel Plate With 1/4 in. Winch Plate For Strength
- 12000 lb. Winch Capacity
- OE Sensor Compatible
- Includes License Plate Bracket
- Light Fitment 30 in. Dual Row LED Middle And 4 Cube LEDs
- Full Replacement Bumper With Full Grill Guard
- Flat Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-on 1in. D-ring Mounts
- Optional Bolt-on 2in. Receiver
- MADE IN THE USA
- ELITE Front Guard Plate
- Full Replacement Bumper w/Full Grill Guard
- Flat Black Powder Coat
- Bolt-on Tow Hooks Included
- Light Mounts For Factory Fog Lights
- Optional Bolt-on Winch Mount
- Optional Bolt-On 1 in. D-Ring Mounts
- Optional Bolt-On 2 in. Receiver
- MADE IN THE USA
- 3/16 in. Steel Plate Construction
- Bolt On Design For All Body Armor JL Front Bumpers
- 20 in. Single Row Light Opening
- Two-Stage Light Texture Finish In Black
- FMJ Full Width Winch Bumper
- FMJ Stubby Winch Bumper
- Integrated Winch Plate
- Single 2 Hoop With Two Light Tabs
- Skid Plate For Steering Box
- Reinforced Bumper Wings For Added Strength
- Dual Shackle Plates For D-Rings
- Fits TJ And YJ All Models
- Dual Process Black Textured Powder Coat
- For Toyota Kakadu
- Front Bumper
- Gloss Black
- Without Raiser
- Welded End Caps
- Limited 5 Year Warranty
- Gloss Black Powder Coat
- Front Bumper
- With Hoop
- No Drill Installation
- 5-Year Limited Warranty
- Front Bumper Kit
- Bumper and Ends
- OE Style
- Direct Fit
- Limited 5 Year Warranty
- High Clearance Design
- Integrated Winch Plate
- 2 in.. Dia. Center Hoop With Light Tabs
- Dual Shackle Plates For D-Rings
- Dual Process Black Powder Coat Finish
- Light Mounting Holes On Bumper Wings
- Cold Rolled Sheet Steel
- 250 Heavy Grade Wall Tubing
- Cold Rolled Sheet Steel
- 250 Heavy Grade Wall Tubing
- Robotically Welded To Specifications
- Black Bumpers Are Double Powdercoated
- Stainless Steel Is Polished To Mirror Finish
- Welded One Piece Design
- Extremely Durable
- Tapered Ends For Enhanced Tire Travel
- Extreme Approach And Departure Angles
- Ground level light receptacles and Stinger Bar
- Textured Black Powder Coat Finish
- Accepts Most Winches
- 4 in. Light Receptacles
- 1 in. D Rings Included
- Air Bag Compatible Mounting System
- Automotive Grade Polyurethane Buffers
- Recessed Roller Fairlead Provision
- Gloss Black
- With Raiser
- Welded End Caps
- Limited 5 Year Warranty
- Vehicle-Specific Design Suits The Jeep Wrangler JL And Gladiator JT Fitted w/Front Parking Sensors
- Provision To Accommodate ARB Intensity LEDs And A Range Of Bushranger And IPF Lights
- Wing Design Allows For A 37 Tire To Be Fitted [Suitable Suspension Lift And Rim Off Set Required]
- Zinc Rich Primer For Additional Corrosion Resistance
- Durable Steel Construction For Maximum Protection
- Equally Suited For Winch Or Non-Winch Applications
- Engineered Air Bag Compatible Mounting System Secures To The Chassis Via High Tensile Bolts And ARB Impact Absorbers
- Press-Formed Apertures In The Bumper For Fitment Of OE LED Fog Lights
- Twin Jack Points Located In Center Pan To Suit ARB Jack And Mechanical Jacks
- Durable Urethane Buffers
- Two Aerial Brackets Located On The Top Of The Center Pan
- Accommodates Warn/Magnum/Bushranger/Smittybilt Low Mount Model Electric Winches Up To 10000Lb
- Full Width Bumper
- Provides Greater Tire Clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
- Side Vents And Large Mesh Insert For Optimal Air Flow
- Accommodates Most 20 Light Bar With Optional Insert
- Front Bumper
- Stubby Bumper
- Provides Maximum Tire Clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
- Side Vents And Large Mesh Insert For Optimal Air Flow
- Accommodates Most 20 Light Bar With Optional Insert
- Provides Greater Tire Clearance
- Fully Customizable w/A 14 Piece Modular Design
- Strategically Placed Cutouts For Maximum Airflow
- Mounting Options For 2x2 in. Dually Lights To Max. Light Coverage
- Engineered To Work With Up To A 12000 lbs. Warn Zeon Winch
- 3/16 in. Steel Winch Tray
- MADE IN THE USA
- Revolutionary Combination Of Both Grille And Winch Bumper
- Provides Greater Tire Clearance
- Strategically Placed Cutouts For Maximum Airflow
- Engineered To Work With Up To A 12000 Lbs Warn Zeon Winch
- Complete Bolt On Installation w/Stainless Steel Hardware
- MADE IN THE USA
- Aggressive Design And Unique Styling
- Combines Both Grill And Bumper
- Side Mounting Slots And Tabs For Light Options
- Lower Cutout For Increased Airflow
- Provides Far More Tire Clearance
- Removable Insert For Customization Options
- Aggressive Design
- Bumper Is Designed Ultra Narrow
- Provide Maximum Tire Clearance
- Tapered Knife Edge Design
- Welded Inside And Out For Superior Strength
- Winch Ready Including WARN Power Plant
- Black Powder Coat
- Manufactured From High Quality Cold Roll Steel
- Precision Laser Cut
- CNC Press Brake Formed
- Works With Most Winches On The Market
- Includes .75 in. Steel Shackles With Black Isolators
- Includes LED Cube Lights
- Light Bars Sold Separately
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- Made Of 7 Gauge Steel
- 1-Piece Welded Construction
- Fits Medium Frame 8000-12000 lbs. Winches [Up To 9.75 in. Tall]
- Fits Remote Solenoid Box Winches Only
- Pre-Drilled For Winch And Fairlead Mounting
- Laser-Cut Openings To Allow Engine Cooling
- Built To Receive [2] 10 in. Led Light Bars
- Optional Light Bar And Pre-Runner Bar Sold Separately
- 1 in. Thick HD Shackle Mounts
- Adj. Mounting Brackets Accommodate Led Lights 11-12.75 in. Long
- Application Specific Designs
- Available In Textured Black Finish Or Raw
- High-Strength Steel Construction
- Built-In Recessed Winch Plate Improves Airflow To Radiator
- Fairlead Attachment Plate Accommodates Most Standard-Sized
- 3/16 in. Laser Cut Steel With E-Coat/Wrinkle Finish Powder Coat
- Developed Specifically For The Hard Core Rock Crawler
- Sturdy Winch Plate Is Incl. Accommodate Most Standard-Sized
- Bolt-On/No-Drill Installation To Factory Mounting Locations
- Accessories Shown Are Not Included
- Modular Front Bumper Specifically Designed
- Design Let You Build Up The Front Bumper As Desired w/Accessories
- High-Access Shape Of The Bumper Allows More Clearance Over Rocks
- 3/16 in. Thick Steel To Withstand Tough Off-Road Trails
- Bolt-On Installation To Factory Bumper Mounting Locations
- No Drilling Required
- Incl. Fully-Welded D-Ring Shackle Mounts w/1 in. Inside Diameter
- Compatible w/Factory Fog Lights/Incl. Wiring Connector Extension
- Accessories Not Included
- Tough As Nails/Tested For Durability And Strength
- X-treme-Built Front Bumpers
- 2X5X0.190 in. Wall Enclosed Rectangular Tube
- Use With Body Armor Winch Plate
- Manufactured In 54 in. Length
- 4-Mil Black Powder Coat Finish
- Shackle Mounts Welded Front And Rear Surfaces
- Steering Box Slid Plate And Light Tabs
- 2 in. Recovery Receiver Package/No Drill-Bolt
- Includes License Plate Mounting Holes
- Does Not Have Impact Strip Holes
- Quality Stamped For A Precise Fit And Look
- Heavy Gauge Steel For Strength
- Chrome Plated For Oe Finish And Corrosion Protection
- Includes All Factory Mounting Points For An Easy Installation
- Increased Tire Clearance
- Low-Profile Bull Bar
- Constructed Of 11-Gauge Steel
- Recessed Pod Light Cavities - Lights Sold Separately
- Recessed 20 in. Light Bar Cavity - Light Sold Separately
- High-Strength 1 in. D-Ring Tabs
- Durable High-Quality Black Powder-Coat
- Parking Sensor Compatible
- Limited Lifetime Warranty
- A Tough Dependable Product
- Designed With Off Road Rally Styling
- Contoured Skirts To Protect The Underside Of Your Vehicle
- Black Powdercoat Finish
- Incl. Light Tabs/License Plate Mounting Holes/2 in. Receiver
- Black Matte Finish Is An Option
- Proudly Made In The USA
- Ranch Hands Legend Front Bumper Provides Maximum Protection
- 4 in. Schedule 40 Pipe Bumper
- The Toughest Product On The Market Today
- Comes Standard With 2 in. Receiver And Sturdy Frame Mounting
- Super Polyester Black Powder Coat Finish
- Options Include Black Matte Finish And Rubber Upright Pads
- Proudly Made In The USA
- Winch Ready
- Integrated D-Ring Mounts And Tow Hooks
- Fab Fours Signature Injection Molded Light Housings
- 90mm Fog And 60mm Turn Indicator Lights Are Included
- Winch Delete Tray Included
- Enhances the look while remaining lightweight
- 1in. D-Ring Mounts
- HELLA 90mm Fogs And 60mm Turns Included
- Signature Light Housings
- 9.5 Winch Ready
- Mounting Brackets And Hardware Included
- Lifetime Warranty On Structure
- 1 3/4in. OD Tube Grill Guard
- Direct Fit
- M1 Truck Front Bumper
- Manufactured From 3/16 and 1/4 Cold Roll Steel
- Ultra Bright Driving And Fog Lights
- Solid Mount D-Rings - Welds On The Inside And Out
- Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
- M1A2 Modular Front Bumper For 14-18 Chevy Silverado
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Aggressive Chiseled Design
- Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
- Pre-Drilled For Winch And Fairlead Mounting
- Fits Most Flush Mount Auxiliary Lights
- 1 in. Thick HD Shackle Mounts
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Aggressive Chiseled Design
- Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
- Pre-Drilled For Winch And Fairlead Mounting
- Fits Most Flush Mount Auxiliary Lights
- 1 in. Thick HD Shackle Mounts
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Aggressive Chiseled Design
- Fits Most Medium Frame 8000-12000 lbs. Up To 10.25 in.
- Pre-Drilled For Winch And Fairlead Mounting
- Fits Most Flush Mount Auxiliary Lights
- 1 in. Thick HD Shackle Mounts
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- 1 Year Finish Warranty
- Limited Lifetime Workmanship Warranty
- Winch Ready-Accepts Up To 12000 lbs. Warn Zeon Winch
- 3/16 in. Steel Construction
- 140 lbs.
- Mounting Options For 2x2 in. Cube Lights To Maximum Led Coverage
- Front Bumper w/Provided Brackets That Tie Directly To The Frame
- MADE IN THE USA
- 3/5mm Thick Textured Matte Black Powder Coat
- Black Anodized Stainless Steel Bolts For Inserts
- Removable Inserts For Customization
- Provides Far More Tire Clearance
- Lower Cutout For Increased Airflow
- 5 Year Warranty On Finish
- Anti-Corrosion Treated .095 Wall Race Car Tubing
- Bolt On Design
- Bolt To Factory Mounts On Frame Horns
- Extra Thick Powder Coat Finish
- Houses LED Light Bars
- Included Skid Plate For Added Strength
- Lifetime Warranty On Product
- Lights Are Not Included With Purchase
- Mounting Brackets Will Vary With Make/Model
- Vehicle-Specific Design Suits Ford Bronco Wide Fender Flares
- Durable Steel Construction For Maximum Protection
- Pre-Assembled w/Fog Housing And Integrated LED Light Bar
- Twin Jack Points Located In Center Pan
- Twin-Forged Chassis-Mounted ARB Rated 8T Recovery Points
- Wing Design Allows For A 37 in. Tire
- Zinc Rich Primer For Additional Corrosion Resistance
- Finished In Integrit Black Textured Powder Coat
- Press Formed Apertures In Bumper For Fitment Of Fog Light
- 3mm Laser Cut And Press Formed Center Panel
- w/NP Provision In Vintage Silver
- Open Fender Front Bumper
- Mount Kit Included
- 2 In. Diameter Tube Frame With 1.5 In. Diameter Center Tubes
- Integrated Mount For Two Single Or One Double Row 30 In. LED Bar
- Equipped With Mount Points For Optional Auxiliary Lighting
- Optional Outlaw Skid Plate Available. Sold Separately
- Optional Outlaw Led Light Kits Available. Sold Separately
- Round Led Light Kit w/Westin Auxiliary Lights Sold Separately
- Square Led Light Kit w/Hyper Auxiliary Lights Sold Separately
- Black Powder Coated
- 1/4in. And 3/16in. Steel Construction
- Winch Mount For The WARN 16.5 Or Smaller
- 1in. D-Ring Mounts
- Mounting Brackets And Hardware Included
- HELLA 90mm Fog Lights And 60mm Turns Included
- Fully Welded Inside And Out
- Lifetime Warranty On Structure
- 1/4in. And 3/16in. Steel Construction
- Winch Mount For The WARN 16.5 Or Smaller
- 1in. D-Ring Mounts
- Mounting Brackets And Hardware Included
- Fab Four 90mm Fog Lights And 60mm Turns Included
- Fully Welded Inside And Out
- Lifetime Warranty On Structure
- Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area
- Has Provisions For Factory Sensors - On Some Applications
- 10 Gauge Steel Valance Included - On Some Applications
- Valance Features Laser-Cut Westin Logo
- Bolt On Skid Plate Available - Sold Separately
- Compatible For Factory Tow Hooks - On Some Applications
- Outrigger Brackets Support Wings Of Bumper For Maximum Strength
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Low Profile Design
- The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
- Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
- Constructed Of 10 Gauge Steel For Strength And Style
- Heavy-Duty 4 Gauge Winch Mount Center Section
- Features Large Winch Access Holes For Easier Operation
- Provides Two Recovery Points For Shackles
- Configured To Accept Most Single Row 20 in. Led Light Bars
- Available In Two Bull Bar Styles/Round And Angular
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Available In Textured Black Finish
- Front Winch Bumper
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- No Receiver
- With D-Ring Mounts
- Heavy Duty 1/4 in. Steel Plate Design
- Black Powdercoated Finish
- Anti-Corrosion Treated .095 Wall Race Car Tubing
- Bolt On Design
- Bolt To Factory Mounts On Frame Horns
- Extra Thick Powder Coat Finish
- Included Skid Plate For Added Strength
- Mounting Brackets Will Vary With Make/Model
- Lights Are Not Included With Purchase
- Lifetime Warranty On Product
- 5 Year Warranty On Finish
- Houses 4 Off Road Lamps
- Anti-Corrosion Treated .095 Wall Race Car Tubing
- Bolt On Design
- Bolt To Factory Mounts On Frame Horns
- Extra Thick Powder Coat Finish
- Included Skid Plate For Added Strength
- Lifetime Warranty On Product
- Lights Are Not Included With Purchase
- Mounting Brackets Will Vary With Make/Model
- 5 Year Warranty On Finish
- Houses 4 Off Road Lamps
- Durable Steel Construction
- Multi Fold Upswept And Tapered Wing Design
- Optimum Strength And Approach Angle
- Split Pan Design For Max Strength And Airflow
- Superbly Engineered And Air Bag Compatible
- Suited To Winch And Non-Winch Applications
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Fits Most Medium Frame 8000-12000 lbs.
- Mounting Brackets Mount Directly To Frame
- Available In Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Fits Most Medium Frame 8000-12000 lbs.
- Mounting Brackets Mount Directly To Frame
- Available In Textured Black Finish
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- Fits Most Medium Frame 8000-12000 lbs.
- Mounting Brackets Mount Directly To Frame
- Available In Textured Black Finish
- Black
- Bumper only
- Stamped Steel
- Efficient Stamping Process Used
- Creates A Product Lighter Than Most Aftermarket Steel Bumpers
- Sturdy 11 Gauge Powder Coated Steel Construction
- Black
- 2.5 in. Diameter Reversible Over-Rider Included
- Stamped Steel
- Efficient Stamping Process Used
- Creates A Product Lighter Than Most Aftermarket Steel Bumpers
- Sturdy 11 Gauge Powder Coated Steel Construction
- Full Width Standard Ends Add An Aggressive Off-Road Look
- Black Textured Powder Coat Finish Resists Rust And Corrosion
- Incl. HD Winch Plate/D-Shackle Mounts/Stylized Overrider
- Direct Bolt-On Replacement/Maintains Factory Fog Lights
- Limited 5 Year Warranty
- Sport Front Bumper Provides Maximum Protection For Your Vehicle
- The 15K Winch Option Comes Standard
- 1/4 in. Formed Channel Bumper
- Holds Up To A 16500 lb Warn Winch
- Comes Standard With 2 in. Receiver
- Durable Super Polyester Black Powdercoat Finish
- Black Matte Finish And Rubber Bumper Pads On Uprights Options
- Proudly Made In The USA
- Raised corners for better entry and exit under the most extreme conditions
- Ability to retain factory fog lights
- Solid 3/4 in. D-ring mounts-welded on the inside and out
- Removable bull bar 1.75 in. .120 wall overrider and kickers
- Integrated Gen2 Light Mounting Tabs On The Bull Bar
- Integrated winch plate fits up to 12K LB winch;dual winch bolt pattern 4.5 in. x 10 in. and 4.5 in. x 6 in.
- Open top and side design fits virtually all winch sizes
- Unique triangulation anchor fastens to frame in multiple locations
- Perfect mid width ;57 in. design
- Direct Fit
- Dual-Stage Black Textured Powder Coat Painted For Long Life
- 1/4 in. Steel Plate Design
- Zinc Undercoated
- Bumpers Bolt Directly To Your Vehicle
- Requires No Drilling Or Modifications
- 5-Year Limited Warranty
- Direct Fit
- Textured Black Powder Coat
- Four Taps To Mount Lights
- Wide Opening Allows For Winch Installation
- 1/4 in. Thick Custom Mounting Brackets
- Welded D-Ring Tabs
- Durable 2 in.X.120 in. Wall Over Built
- Bumpers Bolt Directly To Your Vehicle
- Requires No Drilling Or Modifications
- 5-Year Limited Warranty
- 2 And 4-Door Models
- Factory 10th Anniversary Rubicon lights will not fit
- New max solid D-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender To Fender Protection
- Not Vehicle Specific
- Aggressive; stubby bumper design can convert to full-protection bumper
- Deep draw press-formed 3mm cold rolled steel for strength and weight savings
- Bolt-on internal winch plate ;accommodates up to 12k with Integrated lift points and 7/8 in. D-rings mounts
- Removeable overrider can fit single row LED light bar
- heavy duty reinforced skid plate with added lower mounting support
- Provision for OE style fog lights *Excluding lights supplied tih metal Rubicon front bumpers
- Optional side wings ;76731; sold separately with mounts for 3x3 cube lights
- Specific Design To Complement Vehicle
- Durable Steel Construction For Maximum Protection
- Manufactured From 4 mm Laser Cut And Folded Steel Sheet
- Equally Suited To Winch And Non Winch Applications
- Provision To Accommodate A Range Of IPF And ARB Driving Lights
- 0.8 in. 350 Grade Steel Recovery Points
- All Hardware Zinc Plated For Corrosion Resistance
- All Exterior Surfaces Are CMT Pulse Welded
- ERW Center Frame Tube
- Winch Ready
- Integrated D-Rings And Tow Hooks
- Gives Your Vehicle That Custom Offroad Style
- Made w/12 Gauge Diamond Plate Specifically For Half-ton Trucks
- Black Matte Finish Is An Option
- Proudly Made In The USA
- Air Bag Compatible
- 30mm Radius On Wings And Center
- Incl. LED Indicator And Clearance Light
- Will Accommodate Warn/Magnum/Smittybilt Low Mount Winches
- Durable Two-Piece Buffers
- Vehicle Specific Design
- Twin Hi-Lift Jack Points
- Two Aerial Brackets
- Will Accommodate Intensity LEDs And IPF Lights
- Zinc Rich Primer For Corrosion Resistance
- Summit Front Bumper Is Built From 12 Gauge Diamond Plate Steel
- Sturdy But Lightweight
- Optional H2R For A Receiver Without Removing The Front Bumper
- Comes Standard With Tough Black Powdercoat Finish
- Other Options Incl. Black Matte Finish And Rubber Upright Pads
- Proudly Made In The USA
- Stubby Design For Maximum Tire Clearance
- Winch Ready
- Integrated Shackle Mounts
- Integrated 10 in. Dual Row Light Bar Mount
- Simple And Quick Installation
- Includes Scorpion 20 in. LED Single Row Light Bar
- Black Powder Coat
- Integrated .75 in. Thick Winch Plate
- Slim Sleek Design That Molds To The Factory Bumper
- Steel Construction
- Works With Most Winches On The Market
- Functional Design
- Works With 2 in. Receiver Tow Hitch
- Contoured Corners
- Allows Clearance For Spare Tire
- Black Powdercoat Finish
- 3 Year Warranty
- Modular Pieces Can Be Added Or Removed To Change The Look
- LEDs Feature Waterproof Aluminum Housing And 50000-Hour Lifespan
- Flood Beam Pattern w/2200-Lumen Output Each
- Cutouts And Mounting Tabs Allow For OE Lights
- Pre-Formed Slots On The Brush Guard Accept LED Lights On Top
- Brush Guard Also Adds Extra Protection For The Winch Housing
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Pre-Drilled Holes For Anti-Rattle D-Rings PN 2081300
- 22-1/2 in. x 7-3/4 in. Winch Housing
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Modular Pieces Can Be Added Or Removed To Change The Look
- Cutouts and Mounting Tabs for OE Lights and Aftermarket LEDs
- 3/16 in. Carbon Steel Construction For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Pre-Drilled Holes For Anti-Rattle D-Rings PN 2081300
- 22-1/2 in. x 7-3/4 in. Winch Housing Adapter
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers Available
- Includes Front Center Section Only Corners And Brush Guards
- Pre-Drilled Holes For Tow Hooks PN 15600TW
- Requires PN 2072100 For Larger Winches
- Modular Pieces Can Be Added Or Removed To Change The Look
- Bumper Provides Cutouts For Integrating Fender Flare Turn Signals
- Additional Bumper Cutouts And Mounting Tabs For OE Lights
- Narrowed Fender Flares Allow For Greater Clearance w/Larger Tires
- 3/16 in. Carbon Steel Bumper For Maximum Strength
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Pre-Drilled Holes For Anti-Rattle D-Rings PN 2081300
- 22-1/2 in. x 7-3/4 in. Winch Housing
- Pre-Existing Factory Mounting Points For No-Drill Bumper Install
- Front And Rear Bumpers And Fender Flares Available
- Requires Adapter PN 2072100 For Larger Winches
- Includes Center Section PN 2081004/ Corners PN 2081209
- Winch And Shackle Ratings Of 12500 lbs. For Off-Road Purpose
- Standard Winch Mounting Platform Accepts Most Types Of Winches
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Accept Angular Brush Guard PN 2156050 For Added Winch Protection
- Center Round Cutouts Accept OE Bumper Lights
- Includes Brush Guard And Mounting Hardware
- Bull Bar May Interfere w/Forward-Facing Cameras Or Sensors
- Winch And Shackle Rating Of 12500 lbs. For Off-Road Purpose
- Standard Winch Mounting Platform Accepts Most Types Of Winches
- 1/4 in. Thick Sleeves Provide Reliable Anchoring Points
- Shackle Mounts Accept Pins Up To 7/8 in. In Diameter
- No-Drill Install Use Factory Mounting Points w/No Pump Relocation
- One-Piece Construction w/3/16 in. Thick/ All-Steel Plates
- Narrow Width And High Ground Clearance For Off-Road-Style Design
- Durable Carbide Black Powder Coat w/Rust-Resistant E-Coat Finish
- Angular Brush Guard Helps Protect Winch And Adds Aggressive Look
- Center Round Cutouts Accept OE Bumper Lights
- Includes Mounting Hardware And 3/8 in. Thick Brackets
- Includes Bumper/ Brush Guard And Mounting Hardware
- Integrated Winch Plate Inside Bumper For Better Air Flow
- Accommodates Up To A 12k lb. Winch Plate incl. Warn Zeon Winch
- Winch-Protecting Angled Bull Bar
- Shackle Mounts With D-Rings
- Three Year Limited Warranty
- Integrated Single-Row 20 in. LED Light Bar
- Centerpiece Stubby w/ 3 in. Steel Cap Welded Ends
- Factory Mounting Points For Easy Installation
- Textured Black Powder Coat Finish
- Backed By A Five Year Limited Warranty
- 2 in. Steel Tube Construction
- Bolt On Design For All Body Armor JL Front Bumpers
- Welded Adjustable Light Mount
- Two-Stage Light Texture Finish In Black
- Muscular Stamped Steel Construction
- Patented Design Features Sculpted Contours And Sweeping Arches
- Features Built-In Winch Plate/Massive 1-Inch Thick Recovery Hooks
- Octagonal Pockets Accept factory JL / JT Fog Lights
- Easy Bolt-on Installation
- Light Weight
- Steel Construction
- Integrated 20 in. Light Bar Housing
- Mounting Options For Two 2 in. LED
- Lower Cut Offs For Better Air Flow
- Fits High And Tight
- Fits All Models Of Jeep Renegade
- Made In USA
- Winch Ready For The WARN Zeon 10
- Center Mount For Integrated 30 in. Light Bar
- Mounting Options On Each Side For Three 3X3 LED Cube Lights
- Integrated D-Ring Mounts Provides Far Greater Tire Clearance
- Made From 3/16 in. Steel Construction
- 2 Stage Matte Black Powder Coat With Epoxy Primer
- MADE IN THE USA
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
- 3/16-Inch Plate Steel Construction
- Features Adj. Mounting Brackets And Ribs To Protect Your Lights
- Led Light Bar Mount Accommodates A 20 in. Single Row Light Bar
- Winches Fit Inside Bumper To Allow Max Air Flow To The Radiator
- Fits Westin Or Competitor Light Bars
- 2 Side And 2 Front Off-Road Jack Points
- Corner Auxiliary Light Mount Points And Rock Light Mount Points
- Pre-Drilled Holes To Allow Install Of A Winch w/Bumper Installed
- Recovery Shackle Mounting Point Allows Easy Tow Strap Attachment
- Recommended Optional Skid Plate And Light Sold Separately
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions
- Innovative 3 piece design
- Lower design winch plate allowing greater air flow
- Bolt on skid plate
- Re-uses OE fog light
- Manufactured from 3/16 cold rolled steel
- Solid D-Ring mounts
- Tow-able D-ring mounts
- Two-stage textured matte black finish
- Marine grade stainless steel hardware
- Powder coat finish with 5 year warranty
- Smittybilt Advantage Warranty - Limited Lifetime Warranty
- Direct Fit
- 2-Stage Textured Black Powder Coat
- Degree Approach Angles And Raised Corners
- 3/16 in. Cold Rolled Steel
- Stinger Is 1.75 in. Tubing
- Accepts Up To Two 9 in. Lights
- Bumpers Bolt Directly To Your Vehicle
- 5-Year Limited Warranty
- Manufactured From 3/16 Cold Roll Steel
- 1.75 in. 120 Wall Over Rider And Kickers
- Raised corners for better entry and exit under the most extreme conditions
- Solid Mount D-Rings - Welds On The Inside And Out
- Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
- Built In Winch Plate To Accommodate Up To 10K Winch
- One-Piece Welded Design
- Two Stage Matte Black Finish Powder Coat Finish
- 5 Year Limited Warranty
- Direct Fit
- 3/16-inch cold rolled steel
- Two-stage textured matte black finish
- 1.75 in. .120 wall kickers offers fender-to-fender coverage
- PP+TPO slip strips – the ultimate for rock crawling; provides 5/16 in. additional damage protection
- Max solid D-ring and jack point mount welded on the inside and out
- OE fog light ports ;Lights not included
- Compatible With the Alpine Front Facing Camera; HCE-C2600FD4;Sold Separately
- Smittybilt Advantage Lifetime Warranty
- Direct Fit
- 2 And 4-Door Models
- Built-in winch plate to accommodate up to a 15k winch
- Manufactured from 3/16 cold rolled steel
- Solid mount d-rings - Weld on the inside and out
- Two stage textured matte black fin
- Textured Black
- Steel
- No Winch Mount or D-Rings
- Limited 5 Year Warranty
- Textured Black
- Additional Storage
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
- Textured Black
- 2.5 in. Tubing
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
- High Strength And Lightweight Design
- Low Profile Winch Mount Improves Air Flow
- Integrated Lightweight 10-Gauge Steel Shell And 4-Gauge Steel Winch Tray Provides Superior Strength
- Features 4.5 in. X 10 in. Winch Mount Pattern
- Accommodates Most Winches Up To 12000 lbs Capacity
- Provides Two Recovery Points For Shackles
- Compatible With All Factory Sensors
- Hardware And Mounting Brackets Included
- E-Coated Base Coat Provides Long Lasting Corrosion Protection
- Available In Textured Black Finish